« back to the search result list  
1-PENTANETHIOLICSC: 1521 (April 2004)
Amyl mercaptan
Pentyl mercaptan
Amyl hydrosulfide
2-Methylbutyl mercaptan
CAS #: 110-66-7
UN #: 1111
EC Number: 203-789-1

  ACUTE HAZARDS PREVENTION FIRE FIGHTING
FIRE & EXPLOSION Highly flammable. Gives off irritating or toxic fumes (or gases) in a fire.  Vapour/air mixtures are explosive.  NO open flames, NO sparks and NO smoking.  Closed system, ventilation, explosion-proof electrical equipment and lighting.  Use powder, AFFF, foam, carbon dioxide.  In case of fire: keep drums, etc., cool by spraying with water. 

   
  SYMPTOMS PREVENTION FIRST AID
Inhalation Headache. Nausea. Cough.  Use ventilation, local exhaust or breathing protection.  Fresh air, rest. Refer for medical attention. 
Skin Redness. Pain.  Protective gloves.  Remove contaminated clothes. Rinse skin with plenty of water or shower. 
Eyes Redness. Pain.  Wear safety spectacles.  First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention. 
Ingestion Burning sensation in the throat and chest. Headache. Nausea.  Do not eat, drink, or smoke during work.  Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention . 

SPILLAGE DISPOSAL CLASSIFICATION & LABELLING
Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Remove all ignition sources. Cover the spilled material with inert absorbent. Sweep spilled substance into covered sealable containers. Do NOT wash away into sewer. 

According to UN GHS Criteria

 

Transportation
UN Classification
UN Hazard Class: 3; UN Pack Group: II 

STORAGE
Fireproof. 
PACKAGING
 
1-PENTANETHIOL ICSC: 1521
PHYSICAL & CHEMICAL INFORMATION

Physical State; Appearance
COLOURLESS LIQUID WITH CHARACTERISTIC ODOUR. 

Physical dangers
The vapour mixes well with air, explosive mixtures are easily formed. 

Chemical dangers
Decomposes on burning. This produces toxic and corrosive fumes including hydrogen sulfide and sulfur oxides. Reacts with acids, bases and strong oxidants. 

Formula: C5H12S / CH3(CH2)4SH
Molecular mass: 104.2
Boiling point at 61.3kPa: 126.6°C
Melting point: -75.7°C
Relative density (water = 1): 0.84
Solubility in water: none
Vapour pressure, kPa at 25°C: 1.84
Relative vapour density (air = 1): 3.6
Relative density of the vapour/air-mixture at 20°C (air = 1): 1.05
Flash point: 18°C 


EXPOSURE & HEALTH EFFECTS

Routes of exposure
The substance can be absorbed into the body by inhalation of its aerosol. 

Effects of short-term exposure
The substance is irritating to the eyes, skin and respiratory tract. 

Inhalation risk
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C. 

Effects of long-term or repeated exposure
 


OCCUPATIONAL EXPOSURE LIMITS
 

ENVIRONMENT
 

NOTES
Health effects of exposure to the substance have not been investigated adequately. 

ADDITIONAL INFORMATION
  EC Classification
 

All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.