« back to the search result list  
ALLYL PROPYL DISULFIDEICSC: 1422 (October 2001)
2-Propenyl propyl disulfide
Onion oil
CAS #: 2179-59-1
UN #: 1993
EC Number: 218-550-7

  ACUTE HAZARDS PREVENTION FIRE FIGHTING
FIRE & EXPLOSION Combustible. Gives off irritating or toxic fumes (or gases) in a fire.  Above 56°C explosive vapour/air mixtures may be formed.  NO open flames.  Above 56°C use a closed system and ventilation.  Use foam, dry powder, carbon dioxide.   

   
  SYMPTOMS PREVENTION FIRST AID
Inhalation Burning sensation. Cough. Chest tightness. Nausea. Vomiting.  Use ventilation, local exhaust or breathing protection.  Fresh air, rest. 
Skin Burning sensation. Redness.  Protective gloves.  Remove contaminated clothes. Rinse and then wash skin with water and soap. 
Eyes Redness. Pain. Watering of the eyes.  Wear safety goggles or eye protection in combination with breathing protection.  First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention. 
Ingestion   Do not eat, drink, or smoke during work.   

SPILLAGE DISPOSAL CLASSIFICATION & LABELLING
Personal protection: chemical protection suit including self-contained breathing apparatus. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. 

According to UN GHS Criteria

 

Transportation
UN Classification
UN Hazard Class: 3; UN Pack Group: III 

STORAGE
Separated from oxidants. 
PACKAGING
 
ALLYL PROPYL DISULFIDE ICSC: 1422
PHYSICAL & CHEMICAL INFORMATION

Physical State; Appearance
PALE YELLOW LIQUID WITH PUNGENT ODOUR. 

Physical dangers
 

Chemical dangers
Decomposes on burning. This produces sulfur oxides. Reacts with oxidants. 

Formula: C6H12S2 / CH2=CHCH2SSCH2CH2CH3
Molecular mass: 148.3
Boiling point at 2.1kPa: 66-69°C
Melting point: -15°C
Relative density (water = 1): 0.9
Solubility in water: none
Vapour pressure, Pa at 20°C: 50
Relative vapour density (air = 1): 5.1
Relative density of the vapour/air-mixture at 20°C (air = 1): 1.00
Flash point: 56°C 


EXPOSURE & HEALTH EFFECTS

Routes of exposure
The substance can be absorbed into the body by inhalation and by ingestion. 

Effects of short-term exposure
The substance is irritating to the eyes, skin and respiratory tract. 

Inhalation risk
A harmful contamination of the air can be reached rather quickly on evaporation of this substance at 20°C. 

Effects of long-term or repeated exposure
 


OCCUPATIONAL EXPOSURE LIMITS
TLV: 0.5 ppm as TWA; (SEN).
MAK: 12 mg/m3, 2 ppm; peak limitation category: I(1) 

ENVIRONMENT
 

NOTES
 

ADDITIONAL INFORMATION
  EC Classification
 

All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.