« back to the search result list  
SODIUM METASILICATE (ANHYDROUS)ICSC: 0359 (April 2004)
Silicic acid, sodium salt
Disodium metasilicate
Disodium trioxosilicate
CAS #: 6834-92-0
UN #: 3253
EC Number: 229-912-0

  ACUTE HAZARDS PREVENTION FIRE FIGHTING
FIRE & EXPLOSION Not combustible.        In case of fire in the surroundings, use appropriate extinguishing media.   

 PREVENT DISPERSION OF DUST! AVOID ALL CONTACT! IN ALL CASES CONSULT A DOCTOR! 
  SYMPTOMS PREVENTION FIRST AID
Inhalation Sore throat. Burning sensation. Cough. Shortness of breath.  Use local exhaust or breathing protection.  Fresh air, rest. Half-upright position. Artificial respiration may be needed. Refer for medical attention. 
Skin Redness. Pain. Skin burns.  Protective gloves. Protective clothing.  Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention . 
Eyes Redness. Pain. Severe burns.  Wear face shield or eye protection in combination with breathing protection if powder.  First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention. 
Ingestion Burning sensation. Abdominal pain. Shock or collapse.  Do not eat, drink, or smoke during work.  Rinse mouth. Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention . 

SPILLAGE DISPOSAL CLASSIFICATION & LABELLING
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered plastic containers. If appropriate, moisten first to prevent dusting. Cautiously neutralize remainder with dilute acid (preferably acetic acid). Then wash away with plenty of water. 

According to UN GHS Criteria

 

Transportation
UN Classification
UN Hazard Class: 8; UN Pack Group: III 

STORAGE
Separated from strong acids, food and feedstuffs, metals and halogens. Store in an area having corrosion resistant concrete floor. 
PACKAGING
Do not transport with food and feedstuffs. 
SODIUM METASILICATE (ANHYDROUS) ICSC: 0359
PHYSICAL & CHEMICAL INFORMATION

Physical State; Appearance
COLOURLESS-TO-WHITE HYGROSCOPIC SOLID IN VARIOUS FORMS. 

Physical dangers
 

Chemical dangers
The solution in water is a strong base. It reacts violently with acid and is corrosive to aluminium and zinc. This produces flammable/explosive gas (hydrogen - see ICSC 0001). Reacts with halogens. This generates fire hazard. 

Formula: Na2SiO3
Molecular mass: 122.1
Melting point: 1089°C
Density: 2.6 g/cm³
Solubility in water: good 


EXPOSURE & HEALTH EFFECTS

Routes of exposure
The substance can be absorbed into the body by inhalation of its aerosol and by ingestion. 

Effects of short-term exposure
The substance is corrosive to the eyes, skin and respiratory tract. Corrosive on ingestion. 

Inhalation risk
Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed. 

Effects of long-term or repeated exposure
 


OCCUPATIONAL EXPOSURE LIMITS
 

ENVIRONMENT
 

NOTES
 

ADDITIONAL INFORMATION
  EC Classification
Symbol: C; R: 34-37; S: (1/2)-13-24/25-36/37/39-45 

All rights reserved. The published material is being distributed without warranty of any kind, either expressed or implied. Neither ILO nor WHO nor the European Commission shall be responsible for the interpretation and use of the information contained in this material.